1.A connecting link of an O-ring Chain for common application is pre-coated with grease with the pins. Just before connection, confirm the grease about the surfaces of pins, and in case the level of grease is modest, apply grease with bare hands. (If gloves are made use of, the grease is going to be absorbed by the gloves.)
Illustration: Once the connecting hyperlink (I) of an O-ring chain for standard application is
shipped, O-rings are fitted on the roots on the pins. If your O-rings come loose due to vibration through transport, refit the O-rings in on the roots in the pins.
In this case, you’ll want to return the grease collected at the roots in the pins on the central surfaces from the pins, far more at portion A than at portions B shown inside the over illustration. (Portions A is worn on account of sliding with all the bushings.)
two.The chain is usually most quickly connected to the teeth of a sprocket. Engage the hyperlinks at both ends in the chain using the sprocket teeth and match connecting pins. When the sprocket may be moved, the chain can also be linked within the loosened side.
3. Connecting process
one.Confirm that O-rings are attached towards the roots of the pins.
two.Should the volume of grease utilized on the connecting pins is smaller, coat the pins with grease on the central portions.
three.Insert the connecting pins into the bushings on the inner backlinks at the two ends.
four.Verify the grease is applied for the whole face with the O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins to the connecting plate and though pressing the connecting plate, install the spring clip. Confirm no matter if the head (the finish with no split) in the spring clip is turned in the feeding path in the chain. (See the next illustration.)
six.You should definitely verify the spring clip is securely fitted within the clip grooves with the connecting pins.
This completes jointing of your connecting website link. Note that grease around the surfaces of connecting pins and O-rings can be eliminated during installation function. In this case, re-grease making use of the grease to the surface of the base chain or the grease within the polyethylene bag by which the connecting website link was contained.