We – EPG Group the biggest couplings and gears manufacturing unit in China with five various branches. For much more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /
Technical specs
chemical pump
one, Fit for big capacity output
2, In shape for low presssure, lower viscosity material
3,Verified technology
Item Description
Polymer melt transfer and booster pump chemical pumps
GM-LK series of melt gear pump is mainly used in the polymer melt in the production process such as resin, chemical fiber industry with low viscosity, low output pressure, large flow of material transfer, and pressure boost, such as polymer solution, liquid glue, monomers, oligomers, prepolymer or other materials.General installation in melt pipe, used as a booster pumpIn need of heat medium heating can also be installed in the extruder system, as metering pump.This series of melt gear pump has good self-priming performance, can be used in the vacuum reaction condition, the polymer material transfering and pressurization
Product display
.
Can also be used to transport hot melt adhesive, asphalt, paint, adhesives, pharmaceutical, food, oil, fuel, oil, dye, paint, lubricants, polyols excluding particulate impurities such as high viscosity materials.
Main application fields:
For Processing:
PET PBT
PA6 PA66 PA12
LDPE LLDPE HDPE HMWPE
PP EVA PB
PS HIPS ABS SAN
PC PEK
PMMA POM TPU
Other high viscosity Polymers
The characteristic of this GM-G series polymer melt equipment pump underneath the response kettle as discharge pump.
one)it can be used on high temperature (350ºC),high pressure(15MPa),high viscosity (40,000Pas)working condition.
2)The pressure flow pulsation is very small, and even can achieve linear output flow,easy to control
three)Good self-priming performance, can be used in the entrance with the operation condition of vacuum (.05 ~ 0.09 MPa)
4)Precise structure, high precision, long service life
Technical data:
Viscosity: 500~40000Pas(five hundred,000~40,000,000cP)
Suction side pressure : Vacuum(-.05~-.09MPa)~10MPa
Discharge side pressure: 0~15MPa
Differential pressure: 15MPa
Temperature: ≤350ºC
Heating method: Fully heating medium Jacketed
HT medium pressure: ≤1.6MPa
Pump variety and parameter
| Sort |
Volume (cc/r) |
Max roate pace (r/min) |
Outlet strain (MPa) |
Inlet force (MPa) |
Fee of flow m3/h | Temperature | ||
| Minimal viscosity substance one-1000Pa·s |
Substantial viscosity substance a thousand~8000Pa·s |
Ultra-high viscosity substance >=8000Pa·s |
||||||
| GM-LK-100 | one hundred | a hundred | ≤35 | Vacuum~five. | ≤0.fifty one | ≤0.36 | ≤0.21 | ≤350ºC |
| GM-LK-a hundred and sixty | one hundred sixty | one hundred | ≤0.82 | ≤0.fifty seven | ≤0.34 | |||
| GM-LK-200 | two hundred | a hundred | ≤1. | ≤0.seven | ≤0.4 | |||
| GM-LK-250 | 250 | a hundred | ≤1.three | ≤0.9 | ≤0.five | |||
| GM-LK-355 | 315 | 100 | ≤1.six | ≤1.1 | ≤0.seven | |||
| GM-LK-five hundred | five hundred | one hundred | ≤2.six | ≤1.eight | ≤1.one | |||
| GM-LK-750 | 750 | 80 | ≤3.1 | ≤2.one | ≤1.three | |||
| GM-LK-1250 | a thousand | eighty | ≤4.one | ≤2.nine | ≤1.7 | |||
| GM-LK-2000 | 2500 | 80 | ≤10 | ≤7 | ≤4 | |||
| GM-LK-3150 | 3150 | 80 | ≤13 | ≤9 | ≤5 | |||
| GM-LK-4500 | 4500 | 60 | ≤14 | ≤10 | ≤6 | |||
| GM-LK-6300 | 6300 | 60 | ≤19 | ≤13 | ≤8 | |||
| GM-LK-8000 | 8000 | sixty | ≤24 | ≤17 | ≤10 | |||
| GM-LK-12000 | 12000 | fifty | ≤31 | ≤21 | ≤13 | |||
| GM-LK-25000 | 25000 | 50 | ≤64 | ≤45 | ≤27 | |||
| Remark:the soften equipment pump stream is related with the perform speed, substance viscosity, strain, So the design assortment remember to ask for us. |
||||||||
Sealing structure
1)the melt dynamic seal and packing seal
two)Single/double side machanical seal
three)With cooling melt dynamic seal
four)High temperature resistant packing seal
Installation way: GM-HG series melt gear pump generaaly is installed under the reaction kettle, it is used as the material discharge pump, usually arranged horizontally.
Drive mode:motor + reducer + universal coupling
Commissioning
We provide the operation manual for customers to gudie to install the screen changer, and at the requirement of user, salers should send technician to install and commissioning the die at site of Buyers, expenses of the trip should be borne by Buyers.
After-sales service
12 months with proper operation by user, all the spare parts shall be replaced free of charge under guarantee period, fee for transportation and packing will be borne by users.
/ The use of first gear manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our firm and the detailed EPT areas contained herein are not sponsored, accepted, or manufactured by the OEM. /
