We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
★The bearing of grinding wheel spindle is five plates dynamic sliding bearing, with high carrying capacity and rigidity.
★The bearing of regulating wheel spindle is 1:30 cones integral sliding bearing with high carrying capacity and precision.
★The feeding system equipped servo motor with high precision planetary gear reducer, feeding through coupling driving ballscrew.
★The grinding wheel dresser droved by servo motor and ball screw, dressing any steps without any gauge finder.
★AC frequency converter is used for regulating wheel speed control .
★Hydraulic transmission & stepless speed regulation are adopted on regulating wheel dresser.
★The machine operated by 10′ touch screen, auto plunge feeding, load, speed, time and steps can be adjusted.
★Equipped Mitsubishi EPT system.
The grinder is mainly used for through-feed grinding for cylindrical surface of ring-type and bearing parts, as well as for manual plunge-cut grinding of
various stepped, cones cylindrical screw surfaces.
|Grinding wheel specifications||P400*150*203mm|
|Regulating wheel specifications||PSA300*150*127mm|
|Grinding wheel speed||1668r/min|
|Regulating wheel speed(stepless)||20-200r/min|
|Swiveling angle of regulating wheel|
|1)In vertical plane||-2°~ 5°|
|2)In horizontal plane||0°~ 3°|
|Feed amount per division of the feed handwheel||0.001mm|
|Feed amount per division of the dresser||0.01mm|
|Height from centerline of gri.wheel & reg.wheel to workrest||220mm|
|Total power of machine||13.78kw|
|1)Grinding wheel motor||11kw|
|2)Regulating wheel motor||1.5kw|
|Machine weight||about 2800kg|
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.