Cyclo Drive Reducer

Cycloidal pinwheel reducer is definitely a up-dated of fresh type transmissing machine designed with K-H-V less tooth engagement and the cycloidal pin steering wheel clenching device, which are widely used in drive and reducing of textile and dying, foodstuff, mining and metallurgy, Oil and chemical conveyors, Market, job machinery etc and cranes. various fields.

1. Gear is made from high power low carbon alloy steel by carburizing and quenching. The hardness of tooth surface area can reach HRC58-62. CNC grinding technology is adopted for all good contact efficiency, gears and with excessive precision
2. high transmission performance: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light weight, long service life and high bearing capability;
5. easy to assemble, check and disassemble.

Operation specifications and precautions
1.High modularization design: many equip with various motor or other power suggestions conveniently.Same machine type may equip with several power motor. It is easy to understand the combination and
junction between every equipment type.
2.Transmission ratio: okay division, wide scope. The combined equipment type may form very large transmission ratio, i.e. result very low rotary speed.
3.Form of set up: the positioning to be installed is not limited.
4.High strength, compact: the box body is constructed of high strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and good grinding process, therefore the bearing capability of unitvolume is high.
5.Long life: Beneath the condition of correct type chosen (including choosing ideal operation parameters)normal procedure and maintenance, the life of main parts of speed reducer (except sporting parts) should not be less than 20000 hours. The putting on parts include lubricating oil seal, essential oil and bearing.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is usually low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High acceleration ratio and efficiency
Single stage transmission can reach to 1 1:87 of speed-down ratio and the efficiency is definitely more than 90%. If work with multi-speed travel the speed-down ratio is certainly bigger.
2. Compact
Being adapted epicyclic transmitting basic principle, the input and output shaft are at same axis middle, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is bound at the minimum content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be acquired.The structure is easy, but it can recognize high reduction ratio product.
2. Small gear clearance
The Drive, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are engaged concurrently, and there are several gears engaged with 180 degree symmetry. So, the effect of tooth pitch mistake and cumulative tooth pitch error on the rotation precision is relatively average, which makes the positioning precision and rotation precision reach a very high level.
4. Less parts, easy installation
The three basic elements achieve a higher deceleration ratio, and they are all on a single axis, so the kit is easy to install and easy to shape.
5. Small in proportions and light in weight
Compared with the previous gear device, the quantity is 1/3, the pounds is 1/2, but can obtain the same torque ability and reduction ratio, obtaining small lightweight.
6 High torque capacity
Flexible wheel materials USES exceptional steel with substantial fatigue strength.Different from ordinary transmission unit, the number of teeth meshing accounts for close to 30% of the total quantity of teeth. Furthermore, it is in get in touch with with the surface, in order that the pressure borne by each equipment is reduced and excessive torque capability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the energy loss caused by friction. Therefore, high decrease ratio can be achieved while maintaining high efficiency, and miniaturization of driving motor can be realized.
8. Low noise
The gear meshing cycle swiftness is low, the transmission movement force balance, therefore the operation is quiet, and the vibration is very small.
◆Substantial speed ratio and huge efficiency single-stage transmission can achieve a deceleration ratio of just one 1:87, and the efficiency is more than 90%. If multi-stage transmission is used, the deceleration ratio will become larger.
◆Because planetary transmission principle is adopted, the type shaft and productivity shaft are on a single axis line, in order that the machine version can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is bigger, and the mechanism of balancing machine parts will make the vibration and voice limited to a minimum.
◆Reliable use and extended service life since the key parts are constructed of huge carbon chromium steel, great strength is usually obtained by quenching (HRC58-62), and rolling friction can be used in some transmission contacts, so the service life is very long.
Cycloid reducer is normally a cycloid needle teeth meshing planetary transmission principle drive models, is an ideal transmission has various advantages, versatile, and will be both positive and negative operation.

•Big ratio, and large efficiency Smooth operation,

• low noise The usage of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),

• operation and contact with rolling friction, basically very little wear, durable.

• Compact structure,

• little size Because the utilization of a planetary transmitting, the suggestions shaft and the productivity shaft on a single axis, making the model to obtain the smallest possible size.

• Reasonable design, easy repair, and breakdown easily install,

• minimal number of parts as well as simple lubrication, cycloid reducer trusted by the user.
(1)Size above PL/PF120(including)high torque products adopt essential double wall planet pinion carrier, precision and improve the output strength.

(2).Hoop clamp coupling have five connection ways ideal for different application environments.

(3).Size in this article PL/PF120(incorporating)precision and high strength integral inner gear housing, processed in a single station,which get rid of the cumulative error and assembling mistake of split type.Eliminate casting process;adopt incredibly hot of forging process, which will reduce the blank material defects.

(4).The meshing gear adopt shaving process after carburizing and quenching,which much easier to make gear area smooth and high accuracy,decrease the temperature rising due to gear area gluing and friction.
This series worm-gear reducer was designed after RV worm microreducer, which have a complete norm, wide speed for selection, and many mounting positions. Its performance and mounting dime nsions conform the same sorts of foreign.
The combo of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, beautiful shape, radiate heat efficiently, compact structure and low noise.
Great sealing and adaptability.Its blend with T gear reducer and MB/MBN variator may meet all sorts of speed requirement.


nylon gear coupling

As one of leading nylon gear coupling manufacturers, suppliers and exporters of mechanical products, We offer nylon gear coupling and many other products.

Please contact us for details.

address:Carrer Prat de la Creu,Andorra la Vella,Andorra

Manufacturer supplier exporter of nylon gear coupling

Recent Posts